[c-nsp] Load Balance 2 * SHDSL 2M/2M with a Cisco?

[Kristofer Sigurdsson]

Hi,

2006/6/21, Skeeve Stevens <skeeve at skeeve.org>:
>
> Is there any way that you are able to Load Balance (Bond?) 2 SHDSL
> Connections using a Cisco?
>
> I was thinking maybe 2 * 878's and a 1811 to do something.

The 878 has support for 4-wire mode, effectively bonding 2 SHDSL
connections to one 4,6 Mbit/s connection.  Is that what you're looking
for?

Aside from that, the normal ways for load balancing would apply, i.e.
having two default routes for outbound balancing and routing your
network over two paths for inbound balancing...

-Kristo