[c-nsp] Load Balance 2 * SHDSL 2M/2M with a Cisco?

[Paul Cairney]

On Thu, Jun 22, 2006 at 07:28:19AM +0200, hjan wrote:
> From: "Skeeve Stevens"
> > 
> > Is there any way that you are able to Load Balance (Bond?) 2 SHDSL
> > Connections using a Cisco?
> > 
> > I was thinking maybe 2 * 878's and a 1811 to do something.
> 
> For traffic input or traffic output ?
> For traffic output you may do some PBR or use GLBP.
> ( I 'm not sure but if i remember correctly glbp isn't available on 878 )

Are you looking to do point to point on a pair of lines, or looking to bond a connection to a DSLAM?

Any reason you are looking to use both the 878 and the 1811? Surely either a 1841 or a 26xx/28xx with a pair of WIC-1SDSL would do the job?

And for bonding, have you looked at MLPPP?

Hope this helps,

Paul