[c-nsp] policy routing on c4948

[Kevin Graham]

On 6/22/06, Mark Kent <mark at noc.mainstreet.net> wrote:
> On a c4948-10GE(12.2(25)EWA),
>
> route-map foo permit 10
>  match ip address 150
>  set ip default next-hop a.b.c.d
>
> b) Is there some other magic I can do to get this kind of policy
>    routing without bumping up the cpu so much?

Use 'set ip next-hop'. "set ip default next-hop" is flow switched.

> a) I don't like the 75%, but since the second number is only 2%
>    should I worry about this?

Yes, as it will conitnue to increase with traffic volume.

http://www.cisco.com/univercd/cc/td/doc/product/lan/cat4000/12_2_25a/conf/pbroute.htm