[c-nsp] policy routing on c4948

[Mark Kent]

>> Do a sh proc cpu | ex 0.00 and send the complete output. 

CPU utilization for five seconds: 75%/2%; one minute: 60%; five minutes: 31%
 PID Runtime(ms)   Invoked      uSecs   5Sec   1Min   5Min TTY Process 
   5     9515424   1015558       9369  0.47%  0.13%  0.11%   0 Check heaps      
  29   175947668 999712235        175  2.71%  2.75%  3.37%   0 Cat4k Mgmt HiPri 
  30   448049168 273087323       1640 48.79% 37.45% 18.22%   0 Cat4k Mgmt LoPri 
  55    13893372  88717517        156 19.27% 15.66%  6.26%   0 IP Input         
  68   116515828  20197398       5768  1.67%  1.60%  1.57%   0 CEF: IPv4 proces 
 114        6688   1447009          4  0.07%  0.03%  0.12%   1 Virtual Exec    

Compared to this baseline:

CPU utilization for five seconds: 10%/0%; one minute: 11%; five minutes: 11%
 PID Runtime(ms)   Invoked      uSecs   5Sec   1Min   5Min TTY Process 
   5     9531764   1017348       9369  1.03%  0.18%  0.12%   0 Check heaps      
  18    11097556  22281724        498  0.23%  0.29%  0.27%   0 ARP Input        
  29   1763735521001954106        176  2.55%  2.69%  3.07%   0 Cat4k Mgmt HiPri 
  30   448857292 273458261       1641  4.47%  6.30%  6.10%   0 Cat4k Mgmt LoPri 
  55    13922856  88903918        156  0.15%  0.17%  0.18%   0 IP Input         
  68   116722548  20243417       5765  1.51%  1.55%  1.54%   0 CEF: IPv4 proces 

Thanks,
-mark