[c-nsp] Strange GEIP+ Error on 7507

[Carlos Sean Kamtha]

On Sat, Jun 24, 2006 at 11:37:40PM -0400, Rodney Dunn wrote:
> Please post the error again and a couple from the syslog if you have them.
> 

%VIP4-80 RM7000-3-MSG: slot6 VIP-3-PROCMEM_ECC_SINGLEBIT_ERROR: Processor memory ECC single-bit exception addr = 40038000 data = 00B00000
 
%VIP4-80 RM7000-3-MSG: slot6 VIP-3-PROCMEM_ECC_SINGLEBIT_ERROR: Processor memory ECC single-bit exception addr = 40038000 data = 37B00000

%VIP4-80 RM7000-3-MSG: slot6 VIP-3-PROCMEM_ECC_SINGLEBIT_ERROR: Processor memory ECC single-bit exception addr = 40038000 data = CCB00000

That's pretty much all i have. 

> If it says ECC it's almost NEVER a software problem.
> 
> It's a bit getting flipped somewhere and the ECC correction is detecting and
> fixing it.

ah.

> 
> If you have replaced the GEIP+ (which has ECC protection) I'd probably swap the
> RSP and see if it goes away.

Ok. Would I not also see the same problem with the other GEIP+ I installed
the same day?

> 
> Rodney
> 
> On Sat, Jun 24, 2006 at 08:28:55PM -0700, Carlos Sean Kamtha wrote:
> > On Sat, Jun 24, 2006 at 11:20:39PM -0400, Rodney Dunn wrote:
> > > Post the message again.
> > > 
> > > Please please don't change code unless you have solid proof
> > > it's a code problem.
> > > 
> > > I *thought* he said it was a single bit ECC problem that the
> > > GEIP+ was detecting. If so it could be coming from anywhere in the
> > > chassis.
> > > 
> > 
> > Are you suggesting that it could be a chassis problem? Never
> > had an issue with it until now. The chassis has been full
> > with VIP2-50s for some time..
> > 
> > Carlos.
> > 
> > > > > -----END PGP SIGNATURE-----
> > > > _______________________________________________
> > > > cisco-nsp mailing list  cisco-nsp at puck.nether.net
> > > > https://puck.nether.net/mailman/listinfo/cisco-nsp
> > > > archive at http://puck.nether.net/pipermail/cisco-nsp/