[c-nsp] Need help with 6503 config

[Sam Stickland]

Umm.. This config appears to include two supervisor modules (the SUP720 and
the SUP2) - you don't need both, just the 720. You are missing the fan-tray
for the chassis, and the WS-X6348-RJ45 is very old!

S


> -----Original Message-----
> From: cisco-nsp-bounces at puck.nether.net [mailto:cisco-nsp-
> bounces at puck.nether.net] On Behalf Of Chris Boyd
> Sent: 28 June 2006 12:06
> To: cisco-nsp at puck.nether.net
> Subject: [c-nsp] Need help with 6503 config
> 
> It's been a while since I've looked at Cisco's product lines, but a
> friend has asked me to review a 6503 config for an enterprise
> application with metro Ethernet BGP peers.  The VAR has proposed this
> config.
> 
> 1 Enh Cat 6503-E Chassis, 3slot, 4RU, No Pow Supply, No Fan Tray
> 
> 2 WS-C6503-E2770  WS-CAC-1300W Cisco Catalyst 6000 1300W AC Power Supply
> 
> 1 WS-SUP720
> 
> 1 WS-SUP7207274  WS-X6348-RJ45 Cisco 48 Port Module
> 
> 1 WS-X6K-SUP2-2GE Cisco Supervisor Engine
> 
> I've looked over the Cisco web site config tools, and I think that this
> will work.  Anything that I should look out for?
> 
> Thanks for any suggestions.
> 
> --Chris
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/