[c-nsp] Sup720 + EoMPLS type interworking
David Freedman
david.freedman at uk.clara.net
Sat Mar 4 13:41:32 EST 2006
Well, lets try:
sup720# conf t
Enter configuration commands, one per line. End with CNTL/Z.
sup720(config)#int g13/4.100
sup720(config-subif)#encapsulation dot1Q 100
Command rejected: VLAN 100 already in use by interface Vlan100
sup720(config-subif)#
Looks like its shared to me...
Dave.
On 2006-03-04, Alex Rubenstein <alex at nac.net> wrote:
>
>
>>> Gosh, I didn't think that subinterfacing non-OSM ports was possible on
>>> the catalyst, I wish I had known this earlier.
>>
>> This showed up in SXE. We've played with it in the lab and it works as
>> expected.
>
> Question is -- are the subinterfaces shared? Meaning, gi1/1.100 the same
> vlan has gi1/2.100?
>
> What hardware? Only 720's?
>
>
>
--
David Freedman
Claranet
More information about the cisco-nsp
mailing list