[c-nsp] Dynamic Routing over Tunnel (7507->1811w) ospf or eigrp

[Ian MacKinnon]

Skeeve Stevens wrote:
> Hey guys
> 
> 	I've spent 2 dozen hours trying to make this work and its driving me
> nuts.
> 
> 	I don't have the 'tunnel down to recursive routing' issue.. I got
> past that.
> 
> 	I have an up tunnel, which is all good. I have routes flowing from
> the 1811 (small remote location) to the 7507 in either eigrp or ospf, but no
> routing protocol will propagate into the 1811.  ospf or eigrp.
> 
> 	When I was trying ospf, the routes were in the database on the 1811,
> but not making it into the table. unsure why.
> 
Invalid next hop?


-- 
Ian MacKinnon
Lumison
t: 0845 119 900
d: 0131 514 4055
-- 

This email and any files transmitted with it are confidential and intended 
solely for the use of the individual or entity to whom they are addressed.  
If you have received this email in error please notify the sender. Any 
offers or quotation of service are subject to formal specification.  
Errors and omissions excepted.  Please note that any views or opinions 
presented in this email are solely those of the author and do not 
necessarily represent those of Lumison, nplusone or lightershade ltd.  
Finally, the recipient should check this email and any attachments for the 
presence of viruses.  Lumison, nplusone and lightershade ltd accepts no 
liability for any damage caused by any virus transmitted by this email.

-- 
-- 
Virus scanned by Lumison.