[c-nsp] problem with newly installed vip and pa-fe-tx on 7507

Scott Granados sgranados at jeteye.com
Wed Mar 8 10:48:38 EST 2006


Pete, thanks here's the output of sh diag

core1.sfo#\ 


sh diag
Slot 0:
	Physical slot 0, ~physical slot 0xF, logical slot 0, CBus 0
	Microcode Status 0x4
	Master Enable, LED, WCS Loaded
	Board is analyzed 
	Pending I/O Status: None
	EEPROM format version 1
	VIP4-50 RM5271 controller, HW rev 2.01, board revision A0
	Serial number: 18935536  Part number: 73-4708-02
	Test history: 0x00        RMA number: 00-00-00
	Flags: cisco 7000 board; 7500 compatible

	EEPROM contents (hex):
	  0x20: 01 31 02 01 01 20 EE F0 49 12 64 02 00 00 00 00
	  0x30: 50 05 35 00 00 00 00 00 00 00 00 00 00 00 00 00

	Slot database information:
	Flags: 0x4	Insertion time: 0x241C (09:35:51 ago)

	Controller Memory Size: 64 MBytes CPU SDRAM, 64 MBytes Packet
SDRAM

	PA Bay 0 Information:
		Fast-Ethernet PA, 1 ports, 100BaseTX-ISL
 --More--         		EEPROM format version 1
		HW rev 1.04, Board revision B0
		Serial number: 24178563  Part number: 73-1688-05 

	--Boot log begin--

Cisco Internetwork Operating System Software 
IOS (tm) VIP Software (SVIP-DW-M), Version 12.2(21), RELEASE SOFTWARE
(fc3)
Copyright (c) 1986-2003 by cisco Systems, Inc.
Compiled Tue 02-Dec-03 12:16 by kellmill
Image text-base: 0x60010930, data-base: 0x603E0000


	--Boot log end--

Slot 1:
	Physical slot 1, ~physical slot 0xE, logical slot 1, CBus 0
	WCS Parity Error, Internal Instruction Error, Microcode Status
0x5
	WCS Loaded
	Board is disabled analyzed wedged 
	Pending I/O Status: None
	EEPROM format version 1
	VIP2 R5K controller, HW rev 2.02, board revision A0
 --More--         	Serial number: 12311674  Part
number: 73-2167-04
	Test history: 0x0E        RMA number: 14-35-63
	Flags: cisco 7000 board; 7500 compatible

	EEPROM contents (hex):
	  0x20: 01 1E 02 02 00 BB DC 7A 49 08 77 04 0E 0E 23 3F
	  0x30: 50 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00

	Slot database information:
	Flags: 0x95	Insertion time: 0x241C (09:36:31 ago)

	VIP Controller Memory Size: Unknown

	PA Bay 0 Information:
		Fast-Ethernet PA, 1 ports, 100BaseTX-ISL
		EEPROM format version 1
		HW rev 1.02, Board revision D0
		Serial number: 13338263  Part number: 73-1688-04 

	--Boot log begin--

Cisco Internetwork Operating System Software 
IOS (tm) VIP Software (SVIP-DW-M), Version 12.2(21), RELEASE SOFTWARE
(fc3)
 --More--         Copyright (c) 1986-2003 by cisco
Systems, Inc.
Compiled Tue 02-Dec-03 12:16 by kellmill
Image text-base: 0x60010930, data-base: 0x603E0000


	--Boot log end--

Slot 2:
	EEPROM format version 1
	Route/Switch Processor 4, HW rev 1.01, board revision D0
	Serial number: 14303800  Part number: 73-1689-03
	Test history: 0x00        RMA number: 00-00-00
	Flags: cisco 7000 board; 7500 compatible

	EEPROM contents (hex):
	  0x20: 01 1A 01 01 00 DA 42 38 49 06 99 03 00 00 00 00
	  0x30: 68 32 38 01 00 00 00 00 00 00 00 00 00 00 00 00
Slot 4:
	Physical slot 4, ~physical slot 0xB, logical slot 4, CBus 0
	Microcode Status 0x4
	Master Enable, LED, WCS Loaded
	Board is analyzed 
	Pending I/O Status: None
 --More--         	EEPROM format version 1
	GEIP controller, HW rev 2.03, board revision A0
	Serial number: 18616753  Part number: 73-2167-06
	Test history: 0x00        RMA number: 00-00-00
	Flags: cisco 7000 board; 7500 compatible

	EEPROM contents (hex):
	  0x20: 01 21 02 03 01 1C 11 B1 49 08 77 06 00 00 00 00
	  0x30: 50 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00

	Slot database information:
	Flags: 0x4	Insertion time: 0x241C (09:36:43 ago)

	Controller Memory Size: 64 MBytes DRAM, 8192 KBytes SRAM

	PA Bay 0 Information:
		Gigabit-Ethernet PA, 1 ports
		EEPROM format version 1
		HW rev 1.00, Board revision A0
		Serial number: 10930831  Part number: 73-3144-02 

	--Boot log begin--

 --More--         Cisco Internetwork Operating System
Software 
IOS (tm) VIP Software (SVIP-DW-M), Version 12.2(21), RELEASE SOFTWARE
(fc3)
Copyright (c) 1986-2003 by cisco Systems, Inc.
Compiled Tue 02-Dec-03 12:16 by kellmill
Image text-base: 0x60010930, data-base: 0x603E0000


	--Boot log end--

Slot 31 (virtual):
	EEPROM format version 1
	Chassis Interface, HW rev 1.00, board revision B0
	Serial number: 05037788  Part number: 73-1306-02
	Test history: 0x00        RMA number: 00-00-00
	Flags: cisco 7000 board

	EEPROM contents (hex):
	  0x20: 01 10 01 00 00 4C DE DC 49 05 1A 02 00 00 00 00
	  0x30: 58 00 00 00 FF 00 00 00 00 00 00 00 00 00 00 00
core1.sfo#  



-----Original Message-----
From: Pete Templin [mailto:petelists at templin.org] 
Sent: Wednesday, March 08, 2006 7:38 AM
To: Scott Granados
Cc: cisco-nsp at puck.nether.net
Subject: Re: [c-nsp] problem with newly installed vip and pa-fe-tx on
7507

Scott Granados wrote:
> Hi, last evening, I installed a new vip (I believe 2-50) and pa-fe-tx
on
> a 7507 running 12.2-21 on an rsp4.  Presently I have one bgp session
> attached and this card was going to be the provider facing card for a
> second.
> 
> After installing, the router booted fine, I could do a show int fast
> 1/0/0 and it appeared fine.
> 
> Once the bgp session came up the newly installed vip crashed and I've
> included the logging output below.  It looks like some sort of memory
> issue but I'm not sure if this is bad memory, no memory or what I'm
> finding.  Any pointers would be greatly appreciated.

> VIP-SLOT1:
> 
>  00:01:09: %SYS-2-MALLOCFAIL: Memory allocation of 65556 bytes failed
> from 0x600DF9CC, alignment 16 
> 
> Pool: Processor  Free: 12816  Cause: Not enough free memory 
> 
> Alternate Pool: None  Free: 0  Cause: No Alternate pool 

It'd be low or no memory.  Try 'sh diag' and let us see what that
returns.

pt



More information about the cisco-nsp mailing list