[c-nsp] sh arp functionality missing for VRF's???

[Rolf Mendelsohn]

Hi Guys,

Does anybody know how i can do a 'sh arp' for a VRF?

interface FastEthernet0/0.550
 description Client X HQ
 encapsulation dot1Q 550
 ip vrf forwarding edel-vpn
 ip address 192.168.254.1 255.255.255.252
 no snmp trap link-status
 no cdp enable
!
interface FastEthernet0/0.551
 description Client X Site1
 encapsulation dot1Q 551
 ip vrf forwarding edel-vpn
 ip address 192.168.2.1 255.255.255.0
 no snmp trap link-status
 no cdp enable

vpn1.lda1.ao#ping vrf edel-vpn 192.168.2.1

Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 192.168.2.1, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 1/1/1 ms
vpn1.lda1.ao#ping vrf clientx-vpn 192.168.254.2

Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 192.168.254.2, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 56/70/80 ms
vpn1.lda1.ao#sh arp | inc 192.168.254
vpn1.lda1.ao#sh arp | inc 192.168.254  
vpn1.lda1.ao#

sh arp doesn't work at all.

cheers
/rolf

-- 
Rolf Mendelsohn
Internet Technologies Angola
Cell:  +244-92-3524981