[c-nsp] dot1q subinterfaces on cisco 1721 with MPC860P part# 0

[Ed Ravin]

On Fri, Mar 10, 2006 at 08:36:58PM +0000, Ryan O'Connell wrote:

> On 10/03/2006 18:56, Ed Ravin wrote:
> > I just ran into a Cisco 1721 that wouldn't accept VLAN commands -
> > as described below in an October 2004 post, it appears to be
> > hardware trouble.  The messages in the archives didn't indicate
> > what the final resolution was - does the hardware have to be
> > exchanged with Cisco before VLANs will work?
> 
> I have just run into the same problem myself. (Timing is a bit of a
> coincidence, if you're dealing with a 1721 in Hyderabad, India it's
> the same one) The only solution I have been able to find it a
> replacement of the hardware -

Is there a Cisco field notice on this?  I can't find anything on cisco.com.