[c-nsp] dot1q subinterfaces on cisco 1721 with MPC860P part# 0

[Ryan O'Connell]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
 
On 10/03/2006 18:56, Ed Ravin wrote:
> I just ran into a Cisco 1721 that wouldn't accept VLAN commands -
> as described below in an October 2004 post, it appears to be
> hardware trouble.  The messages in the archives didn't indicate
> what the final resolution was - does the hardware have to be
> exchanged with Cisco before VLANs will work?

I have just run into the same problem myself. (Timing is a bit of a
coincidence, if you're dealing with a 1721 in Hyderabad, India it's
the same one) The only solution I have been able to find it a
replacement of the hardware - I'm chasing the vendor at the moment but
language barriers are making it a slow process. It would appear from
the IOS shipped with the router that it had been sitting in a
warehouse for 18 months+ as that's when the IOS release concerned was
retired.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.3 (MingW32)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org
 
iD8DBQFEEeNmoaLhvISWLh0RAqVQAKDdISnM+/PCx5m61wfjuerVZ+YSMgCgpaYY
c6VgsXehLJ98H3EqkXlcUWo=
=lBtM
-----END PGP SIGNATURE-----