[c-nsp] Pix virtual interface

[Sean Granger]

http://www.cisco.com/en/US/products/sw/secursw/ps2120/products_configuration_guide_book09186a0080172852.html

>>> "Hector R. Barragan" <hbarragan at varay.com> 03/14/06 04:32PM >>>
Hey list, I am new to Cisco PIX firewalls and I have a carrier that is
our hub for one of our customers.  Our carrier is providing the layer 1
and layer 2 connectivity for our customer.  I need to setup routing
between the two sites.  I have configured the router at our customer
site for 172.16.0.6/30.  I need to configure the Pix with a virtual
interface and give it the ip address of 172.16.0.5/30.  I don't know how
to do this and I have researched this but can't find a solution.  If
someone can help me out.  Attached is a show version from the Pix.
Thanks,

pixfirewall# sh ver

Cisco PIX Firewall Version 6.3(4)
Cisco PIX Device Manager Version 3.0(2)

Compiled on Fri 02-Jul-04 00:07 by morlee

JDW-PIX515 up 94 days 18 hours

Hardware:   PIX-515, 32 MB RAM, CPU Pentium 200 MHz
Flash i28F640J5 @ 0x300, 16MB
BIOS Flash AT29C257 @ 0xfffd8000, 32KB

0: ethernet0: address is 0004.9ad0.c992, irq 11
1: ethernet1: address is 0004.9ad0.c993, irq 10
2: ethernet2: address is 0002.b39d.24a8, irq 9
Licensed Features:
Failover:                    Disabled
VPN-DES:                     Enabled
VPN-3DES-AES:                Enabled
Maximum Physical Interfaces: 3
Maximum Interfaces:          5
Cut-through Proxy:           Enabled
Guards:                      Enabled
URL-filtering:               Enabled
Inside Hosts:                Unlimited
Throughput:                  Unlimited
IKE peers:                   Unlimited

This PIX has a Restricted (R) license.

Serial Number: 
Running Activation Key: 
Configuration last modified


Hector

_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net 
https://puck.nether.net/mailman/listinfo/cisco-nsp 
archive at http://puck.nether.net/pipermail/cisco-nsp/