[c-nsp] Installing an I/O controller in a 7200 with NPE-G1

[Robert Blayzor]

Dave Temkin wrote:
> One other thing I forgot to mention is that the ethernet ports on the I/O
> controller do not consume bandwidth points on the bus... So if this is of
> any value to you (ie, you were going to add other ethernet port adapters),
> then it may be wise to continue using an I/O controller.


Is this only specific if you use an NPE-G1 and an I/O controller?
Because in on an NPE-400, the I/O Ethernet ports DO consume bandwidth
points. (400 points for the two port FE I/O controller)

-- 
Robert Blayzor, BOFH
INOC, LLC
rblayzor\@(inoc.net|gmail.com)
PGP: 0x66F90BFC @ http://pgp.mit.edu
Key fingerprint = 6296 F715 038B 44C1 2720  292A 8580 500E 66F9 0BFC

NOTICE: alloc: /dev/null: filesystem full