[c-nsp] Installing an I/O controller in a 7200 with NPE-G1

[Dave Temkin]

Correct,  the I/O controller gets its own bus to the NPE with a NPE-G1.




On Tue, 21 Mar 2006, Robert Blayzor wrote:

> Dave Temkin wrote:
> > One other thing I forgot to mention is that the ethernet ports on the I/O
> > controller do not consume bandwidth points on the bus... So if this is of
> > any value to you (ie, you were going to add other ethernet port adapters),
> > then it may be wise to continue using an I/O controller.
>
>
> Is this only specific if you use an NPE-G1 and an I/O controller?
> Because in on an NPE-400, the I/O Ethernet ports DO consume bandwidth
> points. (400 points for the two port FE I/O controller)
>
>