[c-nsp] 6500-MSFC2(c6sup22) - MPLS

[Graham Wooden]

Hello all,

While I had LDP up, it appears that I can't establish EoMPLS with another
identical switch.  I am getting " implc-null " where I should be seeing
tags.  Both are running 12.1.8b, which is the only sw I have seen so far
that offers the mpls ip command on the interfaces.

Is this problem existing because of the lack of OSM interfaces?  If so, what
can be done so that I can enter MPLS domains as well as provide EoMPLS on
the rj45 card - ws-x6248?  I have no need for any OSM stuff. Do I need the
720 Sup?  Or do I need to run the big c6sup222 12.2 images opposed to the
c6sup22 12.1 images?

Any suggestions would be grand - don't have a lot of cash for this project,
so I am trying to get by on what we do have and possibly get used or
Refurbished if we need to get anything in addition  Again, wanting to
"backhaul" if you will the LDP labels and provide EoMPLS ports - either via
vlan or port based.

Regards,

-graham


RouterA - Loopback0: 192.168.2.1, vlan2 IP: 192.168.1.1
RouterB - Loopback0: 192.168.2.2, vlan2 IP: 192.168.1.2
Vlan3 is the EoMPLS (id being 101).  OSPF is the IRP.
VLAN2 and 3 are EtherSVI.


RouterA#show mpls ldp neighbor
Peer LDP Ident: 192.168.2.2:0; Local LDP Ident 192.168.2.1:0
        TCP connection: 192.168.2.2.11013 - 192.168.2.1.646
        State: Oper; Msgs sent/rcvd: 30/31; Downstream
        Up time: 00:18:40
        LDP discovery sources:
          Vlan2
          Targeted Hello 192.168.2.1 -> 192.168.2.2, active, passive
        Addresses bound to peer LDP Ident:
          127.0.0.12      192.168.2.2     192.168.1.4

  

RouterA#show mpls l2transport vc 101 detail

vcid: 101, local groupid: 67, remote groupid: 66 (vc is up)
client: Vl3 is up, destination: 192.168.2.2, Peer LDP Ident: 192.168.2.2:0
local label: 17, remote label: 18, tunnel label: implc-null
outgoing interface: Vl2, next hop: 192.168.1.4
Local MTU: 1500, Remote MTU: 1500
imposition: LC Programmed
current imposition/last disposition slot: 0/32
Packet totals(in/out): 0/0
byte totals(in/out): 0/0RouterA#show mpls ldp neighbor
Peer LDP Ident: 192.168.2.2:0; Local LDP Ident 192.168.2.1:0
        TCP connection: 192.168.2.2.11013 - 192.168.2.1.646
        State: Oper; Msgs sent/rcvd: 30/31; Downstream
        Up time: 00:18:40
        LDP discovery sources:
          Vlan2
          Targeted Hello 192.168.2.1 -> 192.168.2.2, active, passive
        Addresses bound to peer LDP Ident:
          127.0.0.12      192.168.2.2     192.168.1.4


RouterA#show mpls ldp bindings
  127.0.0.0/8, rev 2
        local binding:  label: imp-null
        remote binding: lsr: 192.168.2.2:0, label: imp-null
  192.168.1.0/24, rev 6
        local binding:  label: imp-null
        remote binding: lsr: 192.168.2.2:0, label: imp-null
  192.168.2.1/32, rev 4
        local binding:  label: imp-null
        remote binding: lsr: 192.168.2.2:0, label: 16
  192.168.2.2/32, rev 8
        local binding:  label: 16
        remote binding: lsr: 192.168.2.2:0, label: imp-null