[c-nsp] sup720 + 3bxl upgrade wrong power allocation?

Bas kilobit at gmail.com
Wed Mar 22 13:54:26 EST 2006


Hi list,

I have two sup720's

One is a "real" sup720 3BXL
The second is a plain sup720 with the 3BXL upgrade.

But acccording to "show power"  there is less power allocated for the
upgraded sup

router1#sh module | i 720|3B
  6    2  Supervisor Engine 720 (Active)         WS-SUP720-BASE     SAD080205EB
  6  Policy Feature Card 3       WS-F6K-PFC3BXL     SAD075404AK  0.301  Ok
  6  MSFC3 Daughterboard         WS-SUP720          SAD080600PN  1.5    Ok

router1#sh power | i 720
6    WS-SUP720-BASE      220.50  5.25   220.50  5.25  on    on



router2#sh module | i 720|3BXL
  6    2  Supervisor Engine 720 (Active)         WS-SUP720-3BXL     SAL09253LEK
  6 Policy Feature Card 3       WS-F6K-PFC3BXL     SAL09253F4Z   1.6    Ok
  6 MSFC3 Daughterboard         WS-SUP720          SAL09243ABD   2.3    Ok

router2#sh power | i 720
6    WS-SUP720-3BXL      328.44  7.82   328.44  7.82  on    on


Is this just a "cosmetic" problem? Or will I run into problems when
the upgraded sup720 starts using more than 220Watt's

Thanks in advance,

Bas



More information about the cisco-nsp mailing list