[c-nsp] User based rate limit

Danielsen.Peter Christian PED PED at KMD.dk
Fri Mar 24 03:41:31 EST 2006


> Hi, 
> 
> Iam looking for a way to Rate Limit - Vlan interfaces, 
> Somting like this ..
> 
> !
> Interface Vlan2
> 	Description Customer-A
> 	service-policy input police-customerA-traffic
> 	service-policy output police-customerA-traffic
> 	ip address 10.10.10.1 255.255.255.252
> !
> Interface Vlan3
> 	Description Customer-B
> 	service-policy input police-customerB-traffic
> 	service-policy output police-customerB-traffic
> 	ip address 10.10.11.1 255.255.255.252
> !
> Interface Vlan4
> 	Description Customer-C
> 	service-policy input police-customerC-traffic
> 	service-policy output police-customerC-traffic
> 	ip address 10.10.12.1 255.255.255.252
> !
> Interface GigabitEthernet3/1
> 	Description Trunk - Customer-A - Customer-C
> 	switchport
> 	switchport trunk encapsulation dot1q
> 	switchport trunk allowed vlan 2,4
> 	switchport mode trunk
> !
> Interface GigabitEthernet3/1
> 	Description Trunk - Customer-B
> 	switchport
> 	switchport trunk encapsulation dot1q
> 	switchport trunk allowed vlan 3
> 	switchport mode trunk
> !
> 
> Is that posible ??, or do i need to make user based rate limit based
> on Source / destination adresses, and move the service policy to the
> physical interface ?? 
> 
> Thanks in advance.
> 
> /Peter
> 




_______________________________________________________________________________________
www.kmd.dk   www.kundenet.kmd.dk   www.eboks.dk   www.civitas.dk   www.netborger.dk www.organisator.dk

Hvis du har modtaget denne mail ved en fejl vil jeg gerne, at du informerer mig og sletter den.
KMD skaber it-services, der fremmer effektivitet hos det offentlige, erhvervslivet og borgerne.

If you received this e-mail by mistake, please notify me and delete it. Thank you.
Our mission is to enhance the efficiency of the public sector and improve its service of the general public. 




More information about the cisco-nsp mailing list