[c-nsp] Cisco 2950G Question

[Paul Stewart]

We are looking at putting a Cisco WS-C2950G-24-EI into a remote
location.  Our goal is to trunk VLAN's from one GigE port to another
GigE port.  This may be a silly question but will that work on this
particular switch?  I know that if we trunk in VLAN's from the Copper
100 meg ports and "uplink" them to the GigE it works just fine....

Thanks,

Paul Stewart
IP Routing/Switching
Nexicom Inc.
http://www.nexicom.net/