[c-nsp] Cisco 2950G Question

[Kristofer Sigurdsson]

2006/3/27, Paul Stewart <pstewart at nexicomgroup.net>:
> We are looking at putting a Cisco WS-C2950G-24-EI into a remote
> location.  Our goal is to trunk VLAN's from one GigE port to another
> GigE port.  This may be a silly question but will that work on this
> particular switch?  I know that if we trunk in VLAN's from the Copper
> 100 meg ports and "uplink" them to the GigE it works just fine....

Yes, this will work.  Please note, however, that VLANs have to exist
on the 2950 for it to pass traffic on those VLANs.

-Kristo