[c-nsp] 7206VXR Crash

[Paul Stewart]

Hi everyone...
 
We found the cause of the problem and wanted to update the list incase
you run across this:
 
In our config we had:
 
bba-group pppoe global
 virtual-template 1
 sessions auto cleanup

The "sessions auto cleanup" was added less than 24 hours before it
started crashing.... since, we have removed that command and all is
well.  This is running latest IOS for 7206VXR and was happening...
 
Thanks to everyone on the list for the input I received....
 
Take care,
 
Paul Stewart
IP Routing/Switching
Nexicom Inc.
http://www.nexicom.net/ 


________________________________

From: Amol Sapkal [mailto:amolsapkal at gmail.com] 
Sent: Friday, May 05, 2006 4:44 AM
To: cisco-nsp; Paul Stewart
Subject: Re: [c-nsp] 7206VXR Crash


Hi,
 
You should be cecking your 'show stack' output to see whether the memory
addresses below reflect in that output. I know this doesn't answer your
question 'Why', but thought would be useful information.
 
 
 
 
Regards,
Amol Sapkal

 
On 5/5/06, Paul Stewart <pstewart at nexicomgroup.net> wrote: 

	Anyone know why a 7206VXR that's been working perfectly for over
2 years
	would all of a sudden do this: 
	
	%SYS-2-NOTQ: unqueue didn't find 0 in queue 65567CE0
	-Process= "<interrupt level>", ipl= 1
	-Traceback= 0x606F814C 0x61BC6220 0x61BC8DC8 0x604EB780
0x604F2400
	%SYS-2-NOTQ: unqueue didn't find 0 in queue 65567CE0 
	-Process= "<interrupt level>", ipl= 1
	-Traceback= 0x606F814C 0x61BC6220 0x61BC8DC8 0x604EB780
0x604F2400
	%SYS-2-NOTQ: unqueue didn't find 0 in queue 65567CE0
	-Process= "<interrupt level>", ipl= 1 
	-Traceback= 0x606F814C 0x61BC6220 0x61BC8DC8 0x604EB780
0x604F2400
	%SYS-2-NOTQ: unqueue didn't find 0 in queue 65567CE0
	-Process= "<interrupt level>", ipl= 1
	-Traceback= 0x606F814C 0x61BC6220 0x61BC8DC8 0x604EB780
0x604F2400 
	%SYS-2-NOTQ: unqueue didn't find 0 in queue 65567CE0
	-Process= "<interrupt level>", ipl= 1
	-Traceback= 0x606F814C 0x61BC6220 0x61BC8DC8 0x604EB780
0x604F2400
	%SYS-2-NOTQ: unqueue didn't find 0 in queue 65567CE0 
	-Process= "<interrupt level>", ipl= 1
	-Traceback= 0x606F814C 0x61BC6220 0x61BC8DC8 0x604EB780
0x604F2400
	
	
	Thanks,
	
	Paul Stewart
	IP Routing/Switching
	Nexicom Inc.
	http://www.nexicom.net/
	
	_______________________________________________
	cisco-nsp mailing list  cisco-nsp at puck.nether.net
	https://puck.nether.net/mailman/listinfo/cisco-nsp
	archive at http://puck.nether.net/pipermail/cisco-nsp/
	




-- 
Warm regards,

Amol Sapkal

-------------------------------------------------------------------
"When I'm not in my right mind, my left mind
gets pretty crowded"
-------------------------------------------------------------------