[c-nsp] 7206VXR Crash

[Joe Maimon]

Yep had this too.

CSCsb00095

SR602902461

I actually explicitly asked the TAC engineer if removing that would be a 
w/a and strangely enough he said no....I did it anyways.

Joe

Paul Stewart wrote:

> Hi everyone...
>  
> We found the cause of the problem and wanted to update the list incase
> you run across this:
>  
> In our config we had:
>  
> bba-group pppoe global
>  virtual-template 1
>  sessions auto cleanup
> 
> The "sessions auto cleanup" was added less than 24 hours before it
> started crashing.... since, we have removed that command and all is
> well.  This is running latest IOS for 7206VXR and was happening...
>  
> Thanks to everyone on the list for the input I received....
>  
> Take care,
>  
> Paul Stewart
> IP Routing/Switching
> Nexicom Inc.
> http://www.nexicom.net/ 
> 
> 
> ________________________________
> 
> From: Amol Sapkal [mailto:amolsapkal at gmail.com] 
> Sent: Friday, May 05, 2006 4:44 AM
> To: cisco-nsp; Paul Stewart
> Subject: Re: [c-nsp] 7206VXR Crash
> 
> 
> Hi,
>  
> You should be cecking your 'show stack' output to see whether the memory
> addresses below reflect in that output. I know this doesn't answer your
> question 'Why', but thought would be useful information.
>  
>  
>  
>  
> Regards,
> Amol Sapkal
> 
>  
> On 5/5/06, Paul Stewart <pstewart at nexicomgroup.net> wrote: 
> 
> 	Anyone know why a 7206VXR that's been working perfectly for over
> 2 years
> 	would all of a sudden do this: 
> 	
> 	%SYS-2-NOTQ: unqueue didn't find 0 in queue 65567CE0
> 	-Process= "<interrupt level>", ipl= 1
> 	-Traceback= 0x606F814C 0x61BC6220 0x61BC8DC8 0x604EB780
> 0x604F2400
> 	%SYS-2-NOTQ: unqueue didn't find 0 in queue 65567CE0 
> 	-Process= "<interrupt level>", ipl= 1
> 	-Traceback= 0x606F814C 0x61BC6220 0x61BC8DC8 0x604EB780
> 0x604F2400
> 	%SYS-2-NOTQ: unqueue didn't find 0 in queue 65567CE0
> 	-Process= "<interrupt level>", ipl= 1 
> 	-Traceback= 0x606F814C 0x61BC6220 0x61BC8DC8 0x604EB780
> 0x604F2400
> 	%SYS-2-NOTQ: unqueue didn't find 0 in queue 65567CE0
> 	-Process= "<interrupt level>", ipl= 1
> 	-Traceback= 0x606F814C 0x61BC6220 0x61BC8DC8 0x604EB780
> 0x604F2400 
> 	%SYS-2-NOTQ: unqueue didn't find 0 in queue 65567CE0
> 	-Process= "<interrupt level>", ipl= 1
> 	-Traceback= 0x606F814C 0x61BC6220 0x61BC8DC8 0x604EB780
> 0x604F2400
> 	%SYS-2-NOTQ: unqueue didn't find 0 in queue 65567CE0 
> 	-Process= "<interrupt level>", ipl= 1
> 	-Traceback= 0x606F814C 0x61BC6220 0x61BC8DC8 0x604EB780
> 0x604F2400
> 	
> 	
> 	Thanks,
> 	
> 	Paul Stewart
> 	IP Routing/Switching
> 	Nexicom Inc.
> 	http://www.nexicom.net/
> 	
> 	_______________________________________________
> 	cisco-nsp mailing list  cisco-nsp at puck.nether.net
> 	https://puck.nether.net/mailman/listinfo/cisco-nsp
> 	archive at http://puck.nether.net/pipermail/cisco-nsp/
> 	
> 
> 
> 
>