[c-nsp] dcef disabled on VIP 2-40 Slot !!!

[Dan Imbroglio]

Hi , 

I have a problem with my 7513 , it is running on a RSP16+ with IOS : Version 12.0(30)S1 .

dcef is getting disabled on the slot 4 , clearing cef & disabling / enabling did not really work . 



sh cef linecard
 Slot      MsgSent    XDRSent  Window   LowQ   MedQ  HighQ Flags
 3            8000     106813     125      0      0      0 up
 4             386      37880 LC wait      0      0      0 disabled
 5            7999     106817     125      0      0      0 up
 12           8000     106817     125      0      0      0 up

VRF Default, version 43421, 37773 routes
 Slot   Version    CEF-XDR    I/Fs State    Flags
 3        43421     105547       4 Active   sync, table-up
 4        37778      37746       5 Active   table-disabled
 5        43421     105547       7 Active   sync, table-up
 12       43421     105547       5 Active   sync, table-up



The problem starteed when I added a GEIP on slot12 and tried put a PA-2T3+ on slot 4 VIP . dCef is getting disabled with followin on the log 

May  8 11:59:40.650 IST: %FIB-3-FIBDISABLE: Fatal error, slot 4: no memory
May  8 11:59:40.678 IST: %IPC-5-SLAVELOG: VIP-SLOT4:
 1d09h: %SYS-2-MALLOCFAIL: Memory allocation of 65556 bytes failed from 0x600D12
60, alignment 16
Pool: Processor  Free: 56008  Cause: Not enough free memory
Alternate Pool: None  Free: 0  Cause: No Alternate pool

 

-Process= "CEF LC IPC Background", ipl= 2, pid= 39
-Traceback= 600D6364 600D8768 600D1268 603827FC 60383EF8 6038439C 60347DB4 6034E
548 603525E4 6035D014 60372DF8 6036A7F4 6036AA9C 6036AE68 6036BB8C
May  8 11:59:44.106 IST: %IPC-5-SLAVELOG: VIP-SLOT10:
 1d09h: %SYS-2-MALLOCFAIL: Memory allocation of 65556 bytes failed from 0x600D12
60, alignment 16
Pool: Processor  Free: 55200  Cause: Not enough free memory
Alternate Pool: None  Free: 0  Cause: No Alternate pool

 

-Process= "CEF LC IPC Background", ipl= 0, pid= 40
-Traceback= 600D6364 600D8768 600D1268 603832F8 603476D4 6035246C 6035D014 60372
DF8 6036A7F4 6036AA9C 6036AE68 6036BB8C



Slot 4:
        Physical slot 4, ~physical slot 0xB, logical slot 4, CBus 0
        Microcode Status 0x4
        Master Enable, LED, WCS Loaded
        Board is analyzed
        Pending I/O Status: None
        EEPROM format version 1
        VIP2 controller, FRU: VIP2-40=, HW rev 2.11, board revision E0
        Serial number: 11191899  Part number: 73-1684-04
        Test history: 0x00        RMA number: 00-00-00
        Flags: cisco 7000 board; 7500 compatible

        EEPROM contents (hex):
          0x20: 01 15 02 0B 00 AA C6 5B 49 06 94 04 00 00 00 00
          0x30: 70 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00

        Slot database information:
        Flags: 0x4      Insertion time: 0x3E20 (08:27:13 ago)

        Controller Memory Size: 32 MBytes DRAM, 2048 KBytes SRAM

        PA Bay 0 Information:
                Fast-Ethernet PA, 1 ports, 100BaseTX-ISL, FRU: PA-FE-TX=
                EEPROM format version 1
                HW rev 1.03, Board revision A0
                Serial number: 15195866  Part number: 73-1688-05



Cisco website recommending a upgrade on VIP , The router is recieving around 30K routes from my upstream 

Anyone can suggest something here based on ur experience ???

Dan 
Imbroglio Communique ,Inde