[c-nsp] dsl wic back to back?

[Church, Chuck]

We do that all the time with G.SHDSL WICs and 878 routers.  800 feet
using 4 wires should give pretty decent performance. 


Chuck Church
Network Engineer
CCIE #8776, MCNE, MCSE
Netco Government Services
Enterprise Network Engineering
Home Office - 864-335-9473 
Cell - 864-266-3978
cchurch at netcogov.com

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Jared Mauch
Sent: Thursday, May 11, 2006 4:05 PM
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] dsl wic back to back?


	So, I want to run dsl over a semi-extended distance
(I could attempt to do T1 too i guess, but figure the
distance may cause trouble, around 800 feet), was wondering
if anyone knows if you can use two dsl wics back to back, or
if someone has tried it.

	Looking for a cheaper media option than getting direct-burial
fiber for a neighborhood project[1].  Please reply directly to me
and I can summarize if there is interest.

	- Jared

1 - Wireless has worked sorta-ok, but have had reliability problems
    and now that the trees are getting more leaves, want to extend the
    footprint somewhat and make it more robust.

-- 
Jared Mauch  | pgp key available via finger from jared at puck.nether.net
clue++;      | http://puck.nether.net/~jared/  My statements are only
mine.
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/