[c-nsp] Allow EZVpn through PIX

[Bruce Pinsky]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Bob Fronk wrote:
> We have a sub-contractor that does some work for us.  In order for one
> device at their office to connect to our network, we have installed an 831
> setup as an EZVPN remote.  The 831 connects back to a PIX on our network.
> 
>  
> 
> Recently the sub-contractor placed a PIX on their network.  (They were using
> a Linksys router before).  Now the 831 cannot connect back to my PIX.  The
> tunnel comes up, but no traffic will pass.
> 
>  
> 
> We have tried various things to get this to work. (allowed ports, added
> static maps, etc) but so far, nothing is helping.
> 
>  
> 
> Any ideas appreciated.
> 

Check out:

LAN-to-LAN and EzVPN Client on PIX with VPN Client Access to a Hub Router
using ISAKMP Profiles Configuration Example

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a008032cd24.shtml#t4

- --
=========
bep

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.2.2 (MingW32)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org

iD8DBQFEcg9nE1XcgMgrtyYRAsnfAJ4hcsBQfQFeN64/88Ca0Vw/1fvlpwCg+UyJ
ktlylfxchXPidg/67nfQikQ=
=0Tx2
-----END PGP SIGNATURE-----