[c-nsp] OC12 and Cisco 12k

[Bruce Pinsky]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Kevin Warwashana wrote:
> Is it possible to use a 4OC12X/POS-I-SC-B card and use it subrate?
> 
> IE: Connect to OC12 fiber gear, but only utilize three STS signals instead
> of 12?  This would allow the scalability I am looking for instead of eating
> 1/4 of an OC48 ring from the beginning.
> 

That part number corresponds to a 4-Port OC-12c/STM-4c ISE POS Line Card.  See:
http://www.cisco.com/en/US/products/hw/modules/ps2710/prod_module_install_config_guide09186a0080205a77.html#wp644336

The OC-12c tells you that it's concatenated and cannot be used in a
channelized application.  See:
http://www.cisco.com/en/US/tech/tk482/tk607/technologies_tech_note09186a00800942e3.shtml#t2

- --
=========
bep

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.2.2 (MingW32)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org

iD8DBQFEdkXZE1XcgMgrtyYRAjtFAKCW22GNXOVMO3wpGGt7zE8kGnsjTwCeI172
+c+j+hM2lk3aWpVnVzhlufE=
=X1Tb
-----END PGP SIGNATURE-----