[c-nsp] MRTG problems with STM-1, STM-4 and GE line cards on GSR

[Steve Wright]

Hi Primoz,
 
> Problem is that based on this graph, link is never over 120Mbps or
> so. In reality link is around 300-400Mbps (300-400Mbps of input and
> about same amount of output) and this means constantly between 300
> to 400Mbps all the way through the day.
<SNIP>
> Target[pos60]: 24:xxx at x.x.x.x:

You'll have to start using 64 bit counters as you look to be rolling over on the 32bit counters causing the weirdness!

Simply change your target to look like the following and this should resolve this:
    Target[pos60]: 24:xxx at x.x.x.x:::::2

Thanks,
S


This message has been scanned for viruses by MailController - www.MailController.altohiway.com