[c-nsp] layer2 tunneling

[Tassos Chatzithomaoglou]

I guess L2TPv3 is not supported on soho routers....

--
Tassos

Zoltan HERPAI wrote on 7/11/2006 4:35 μμ:
> Dear All,
> 
> I would like to link up a remote site on layer 2 with a SOHO91 or a 17xx 
> on-site. First thing I looked at was L2TP (vpdn), but after reading 
> through the docs, it seems to me that it is used for hooking up dial-up 
> users into a router somewhere else. I would like to do ethernet bridging 
> only (like bridging an ethernet port into this tunnel at the remote 
> site, and bridging the other end into an other ethernet port at a 
> central point) without the hassle with PPP/LCP settings, and so on.
> Can anyone shed some light on that a.) could vpdn be configured without 
> having to play around PPP/LCP stuff, b.) is there an easier way to do 
> this layer2 tunneling?
> 
> Regards,
> Zoltan HERPAI
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>