[c-nsp] PA-MC-STM1 on 7200VXR?

[sthaug at nethelp.no]

> Has anyone of you used a PA-MC-STM1 in a 7200 yet?
> 
> The document suggest that it "should" be supported in a VXR, but I can't
> find specifics - like "minimum NPE", "bandwidth points", "minimum IOS
> release", etc.

Sure. Using one right now, in fact:

IOS (tm) 7200 Software (C7200-K91P-M), Version 12.2(18)S10, RELEASE SOFTWARE (fc1)
...
cisco 7206VXR (NPE-G1) processor (revision A) with 491520K/32768K bytes of memory.
...
1 Channelized STM-1 port(s)

Slot 4:
        Channelized STM-1 (SMI) Port adapter, 1 port
        Port adapter is analyzed
        Port adapter insertion time 1y1w ago
        EEPROM contents at hardware discovery:
        Hardware Revision        : 1.0
        PCB Serial Number        : JAE063400TC
        Part Number              : 73-4764-06
        Board Revision           : C0
        RMA Test History         : 00
        RMA Number               : 0-0-0-0
        RMA History              : 00
        Deviation Number         : 63040-0
        Product Number           : PA-MC-STM-1SMI
        Top Assy. Part Number    : 800-06544-06

At my previous employer I seem to remember we used them in NPE-400
boxes also - but I'm not 100% sure of this.

Steinar Haug, Nethelp consulting, sthaug at nethelp.no