[c-nsp] Dot1q Tunnel Ports and VLAN translation

[Maya Yajnik]

Hello 

Is it possible to do VLAN Translation on a VLAN which has dot1q tunnel
ports? I mean that suppose I have a customer facing port,
GigabitEthernet5/1, and I make this a dot1q tunnel port and assign it to
VLAN 200. So now the VLAN 200 carries double tagged frames. I also have a
trunk port called GigabitEthernet6/3, in the same network, which is a core
trunk port which is on VLAN 200. On this port, I want to translate VLAN 200
to VLAN 300. Is this possible? I am using a Cisco 

Catalyst 6509 with IOS 12.2SX Please send example commands if possible. 

Thank you for your help!!! 

 

Maya 

 

--------

Maya Yajnik

RRC1-C309

Applied Research

Telcordia Technologies

Piscataway, NJ 08854

Phone: 732-699-2352, FAX: 732-336-7013

-------------------------------------------------------------