[c-nsp] Dot1q Tunnel Ports and VLAN translation

[Dennis]

I had the same question a few weeks ago and found some useful links.

http://www.google.com/search?hl=en&lr=&q=cisco+%22vlan+translation%22

Dennis

On 11/9/06, Maya Yajnik <myajnik at research.telcordia.com> wrote:
>
>
>
> Hello
>
> Is it possible to do VLAN Translation on a VLAN which has dot1q tunnel
> ports? I mean that suppose I have a customer facing port,
> GigabitEthernet5/1, and I make this a dot1q tunnel port and assign it to
> VLAN 200. So now the VLAN 200 carries double tagged frames. I also have a
> trunk port called GigabitEthernet6/3, in the same network, which is a core
> trunk port which is on VLAN 200. On this port, I want to translate VLAN
> 200
> to VLAN 300. Is this possible? I am using a Cisco
>
> Catalyst 6509 with IOS 12.2SX Please send example commands if possible.
>
> Thank you for your help!!!
>
>
>
> Maya
>
>
>
> --------
>
> Maya Yajnik
>
> RRC1-C309
>
> Applied Research
>
> Telcordia Technologies
>
> Piscataway, NJ 08854
>
> Phone: 732-699-2352, FAX: 732-336-7013
>
> -------------------------------------------------------------
>
>
>
>
>
>
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>