[c-nsp] GLC-SX-MM and 50µm mm fiber

[Adam Greene]

Hi,

We're about to roll out some 3560G's with GLC-SX-MM's, and I see they are 
rated for use with both 62.5µm and 50µm multimode fiber. We're accustomed to 
deploying 62.5µm fiber but have been learning that 50µm is probably more 
forward-looking in terms of being able to support 10Gbps if we later upgrade 
the 3560G's.

I assume the GLC-SX-MM should work fine with 50µm but just wanted to make 
sure there aren't any reasons I'm not thinking of why we should stick with 
62.5µm.

Any input would be appreciated.

Thanks,
adam