[c-nsp] Cat 4006 Etherchannel plus VLAN trunking?

[Asbjorn Hojmark - Lists]

> If someone could please send me an example of a working 
> config (or fill in the blanks of the config below), I would
> be extremely grateful.

no int po2
default int range g3/1 - 2

int range g3/1 - 2
 switch
 switch trunk encap dot1q
 switch trunk allow vlan 2,5,10,15
 switch mode trunk
 channel-g 2 mode on
 no shut

should do the trick.

-A