[c-nsp] PIX 515E memory behaviour

[Alex Foster]

Just recenty upgraded our 515e failover pair to 7.1(2) - I havent upgraded the memory to 128Mb as per Ciscos recommendation - this is getting done in a couple of days - but with the original 64Mb in place, the firewalls are happy - for about 6-8 hours until the active runs out of memory. Is this normal behaviour - or is the software possibly corrupt - I know your gonna tell me this is the reason why 128Mb is reccommended - but is it normal behaviour for the memory in a PIX to be slowly consumed (even during  low traffic periods) - if so why is this.
 
Maybe I should mention I upgraded from 6.2(2).
 
Regards
 
Alex
 


The information in this e-mail and any attachments is confidential and may be subject to legal professional privilege. It is intended solely for the attention and use of the named addressee(s). If you are not the intended recipient, or person responsible for delivering this information to the intended recipient, please notify the sender immediately. Unless you are the intended recipient or his/her representative you are prohibited from, and therefore must not, read, copy, distribute, use or retain this message or any part of it. The views expressed in this e-mail may not represent those of Gamma Telecom.

This message has been scanned for viruses by MailController