[c-nsp] SPA-10X1GE (12000) Port-channel Feature

[gben]

Hello Oliver,

Thank you for the quick reply. Do you know when the 12.0(33)S will be 
available?

Best Regards,
George

Oliver Boehmer (oboehmer) wrote:
> cisco-nsp-bounces at puck.nether.net <> wrote on Saturday, November 25,
> 2006 10:30 AM:
>
>   
>> Hello All,
>>
>> Recently we install on 12000(IOS 120-32.S3) a SPA-10X1GE card and we
>> tried to create a Port-Channel with 2 Gigabyte but we got the
>> following error.
>> fragsr01(config-if)#channel-group 2
>> Error: not supported on GigabitEthernet1/0/8.
>>
>> fragsr01(config-if)#
>>
>> I have searched the cco to take more info but I did not find
>> something. Because we need this feature does anybody know if this
>> feature is supported in this type of cards?
>>     
>
> terminating a link bundle on Engine5 is not yet supported (see
> http://www.cisco.com/en/US/products/sw/iosswrel/ps1829/products_feature_
> guide09186a0080103708.html#wp1041842, Engine5 is not listed), it will be
> in 12.0(33)S..
>
> 	oli
>
>   

-- 
Best Regards,
____________________________________
George Benekos
OTEGlobe S.A
Technology Division
24x7: +306974477577
Fax: +302103303524
e-mail : george.benekos at oteglobe.net
website : http://www.oteglobe.gr 


-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.

-------------- next part --------------
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.1.409 / Virus Database: 268.14.15/550 - Release Date: 11/24/2006