[c-nsp] SNMP indexing with SNMPv3

[Enno Rey]

Hi,

in the Cisco context one can use "SNMP community indexing" for different tasks, e.g. getting the MAC address table from a switch
+[for a given VLAN, referenced by an "index" added to the community string], by something like

snmpwalk -c public at 1 14.32.6.17 dot1dTpFdbAddress

[see http://www.cisco.com/warp/public/477/SNMP/cam_snmp.html].
Unfortunately this applies (only?) to community based SNMP. So far, I've not been able to find out how to use this with
+SNMPv3, say to perform the same command as above, just with SNMPv3. For example, where in that command

snmpwalk -v 3  -u admin -l auth -a sha -A secret12 192.168.9.1 1.3.6.1.4.1.9.9.46.1.3.1.1.2

would I add that "index" which is appended to the community string in the community based variant?

Anybody any hints?

thanks,

-- 
Enno Rey

ERNW GmbH - Breslauer Str. 28 - 69124 Heidelberg - www.ernw.de
Tel. +49 6221 480390 - Fax 6221 419008 - Cell +49 173 6745902
PGP FP 055F B3F3 FE9D 71DD C0D5  444E C611 033E 3296 1CC1