[c-nsp] Static nat to a distant network?

[William]

Hi,

This is on my Cisco PIX 6.x

Is it possible to do a static nat from my outside interface to a host
which is one hop away from my dmz interface by just putting it in
normally:

static (dmz,outside) 10.1.1.200 10.1.3.200

where:
          outside = 10.1.1.199
          dmz = 10.1.2.199
          distant network 10.1.3.0/24

I seem to get so far then it complains about

%PIX-6-110001: No route to 10.1.1.200 from 10.1.1.254

Which confuses me entirely.

Thank you.

W.