[c-nsp] Subinterfaces on a 6500 Native?

[Deepak Jain]

There was a time when subinterfaces were only used for MPLS (i.e. OSMs) 
but I thought that was past news. Maybe someone from Cisco can chime in 
and tell me I shouldn't be trying to do VLANs with dot interfaces on a 
Sup2/MSFC2.

Thanks.

DJ

Church, Chuck wrote:
> Don't subints on a 6500 require a Sup720 or an OSM?  I seem to remember
> something like that... 
> 
> 
> Chuck Church
> Network Engineer
> CCIE #8776, MCNE, MCSE
> Multimax, Inc.
> Enterprise Network Engineering
> Home Office - 864-335-9473 
> Cell - 864-266-3978
> cchurch at multimax.com
> 
> -----Original Message-----
> From: cisco-nsp-bounces at puck.nether.net
> [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Deepak Jain
> Sent: Tuesday, October 03, 2006 3:47 PM
> To: cisco-nsp at puck.nether.net
> Subject: [c-nsp] Subinterfaces on a 6500 Native?
> 
> 
> What is the minimum software rev for a 6500/7600 running IOS Native to 
> support (dot) or Subinterfaces for L3 VLAN encapsulation?
> 
> 6500(config)#int g2/12
> 6500(config-if)#int g2/12.200
>                              ^
> % Invalid input detected at '^' marker.
> 
> 6500(config)#encap ?
> % Unrecognized command
> 
> The software rev is:
> 
> Cisco Internetwork Operating System Software
> IOS (tm) c6sup2_rp Software (c6sup2_rp-PSV-M), Version 12.1(22)E6, 
> RELEASE SOFTWARE (fc1) which I was pretty supported it unless I am 
> missing something obvious.
> 
> interface GigabitEthernet2/12
>   ip address 192.168.0.1 255.255.255.252
>   shutdown
> !
> 
> Thanks in advance,
> 
> Deepak
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
> 
> 
>