[c-nsp] Metro Ethernet Switch

[markus mayer]

Hi,

i looked into the Datasheet for the WS-SUP720-3BXL and i found out that the
card only support 32K mac-entries.
This is lower as the 4500 supports, is this a error in the datasheet or do i
miss any information?


Thanks markus.









2006/10/3, Swaroop Potdar <Swaroop.Potdar at corliant.com>:
>
>  Hi Markus,
>
> For what functional purpose you are looking at 4500, as a UPE or NPE.
> This would be the deciding factor. And if you are planning to deploy
> Triple Play Services, then want you to consider that 4500 doesnt support
> MVR.
> This is the last I am aware of 4500 from our last poject.
>
> May be 7609 for NPE would be really good.
> More infor would be appreciated.
>
> HTH-Cheers,
> Swaroop
>
> -----Original Message-----
> *From:* markus mayer [mailto:tryitfirst at googlemail.com]
> *Sent:* Tue 10/3/2006 7:02 PM
> *To:* cisco-nsp
> *Cc:*
> *Subject:* [c-nsp] Metro Ethernet Switch
>
> Hi,
>
> any one can suggest a switch for metro ethernet deployment.
>
> my requirements are:
> 100 to 200 SFP ports  minimum 2 10 Gig ethernet ports.
> more than 127 spanning-tree instance
> 802.1s , 802.1w/d
> more than 64K mac-addresses
> q-in-q
> 4095 VLAN ids and active vlans.
> Privat vlan support
> IGMP v2 and V3
> Layer 2 QOS
>
> I have found the c4503 and c4506, but i do not know which supervisor card
> i
> need to get the above requirements.
>
> Has any one experience with the c4500 series with such a installation?
> Maybe someone has a better suggestion?
>
>
> Thanks Markus
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>
>