[c-nsp] 7206 pvc ranges

[Ruben Alvarez]

Try this article.  'Pvc-in-range' may be the command you are looking for.

http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121newft/121
t/121t5/dtatmpvr.htm#wp1043807


-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Steven Saner
Sent: Friday, October 06, 2006 4:17 PM
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] 7206 pvc ranges

I am needing to make a transition from a Redback platform to a Cisco 7206 
platform for terminating DSL circuits. I have a question about configuring a

range of pvcs:

interface atmx/y.multipoint
  range pvc ...

If you create a range of pvcs in this way with a particular configuration,
can 
you then also create an individual pvc that falls within this range with a 
different configuration? Will that more specific pvc configuration override
the 
configuration in the range?

It works like that on a Redback, but I can find no documentation to confirm
or 
deny if that is possible on a Cisco.

Thanks

Steve

-- 
--------------------------------------------------------------------------
Steven Saner <ssaner at pantheranet.com>
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/