[c-nsp] BGP table load time

[Rolf Mendelsohn]

Hey Eric,

That time seems a bit on the slow side.

have you got "ip tcp path-mtu-discovery" enabled on both routers?

cheers
/rolf

On Tuesday 10 October 2006 03:55, Eric Kagan wrote:
> Looking for some input.  Given the following situation, can someone please
> provide how long it *should* take to push 196K routes over an OC3 with a
> GSR/PRP2 (No
> other info on RAM, etc) at the provider side and a 7206VXR/NPE 400, 512MB
> RAM at the customer side ?  Assuming both devices are running at ideal
> capacity, what would be the approximate load time, rounding to the
> approximate nearest minute is okay.  Basically trying to figure out of 6-8
> minutes is too long or unrealistic.
>
> Thanks
> Eric
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/

-- 
Rolf Mendelsohn
Internet Technologies / MAXNET
Angolan Office: +244-222-399439
Angolan Cell: +244-923524981
Angola Intl-DID: +492216776608
Namibian Office:+264-61-375484

-- 
Rolf Mendelsohn
ITA/MAXNET
+244 923524981