[c-nsp] 7600 12.2(18)SXF5 + Rate-Limit

[Igor Kremez]

Hello,

> Hi All!
> 
> I found an interesting issue on the 7600 plattform with 
> 12.2(18)SXF5. It seems, that the 'rate-limit' command is
> available on the CLI but seems not to work on LAN-Cards.
> I assume, that only MQOS commands will work. 

Rate-limits are working only for CPU switched traffic.
You should use PFC QoS.
http://www.cisco.com/univercd/cc/td/doc/product/core/cis7600/software/122sx/swcg/qos.htm


> 
> Note: The systems is equipped with Sup720-3B and does not
> contain any OSM or SIP based adapters.
> 
> Can someone confirm this?
> 
> cheers,
> michel
> 
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/

--
Best regards,
Igor Kremez