[c-nsp] bridge over E1

[David Prall]

The below is off the top of my head.

Conf t
Bridge irb
Bridge group 1 ieee
Bridge group 1 bridge ip
Bridge group 1 route ip
Int serial x/y
Bridge-group 1
No shut
Int gig x/y
Bridge-group 1
No shut
Int bvi 1
Ip address x.x.x.x y.y.y.y
No shut
End

--
David C Prall dcp at dcptech.com http://dcp.dcptech.com
  

> -----Original Message-----
> From: cisco-nsp-bounces at puck.nether.net 
> [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Rivo 
> ANDRIAMAMPIANINA
> Sent: Friday, October 20, 2006 8:49 AM
> To: cisco-nsp at puck.nether.net
> Subject: [c-nsp] bridge over E1
> 
> Hi all,
> 
>  
> 
> We want to use controller E1 as bridge with another 
> controller E1 (between 2
> router)
> 
> Someone has any idea how to configure it.
> 
>  
> 
> Thank you
> 
>  
> 
> Rivo ANDRIAMAMPIANINA 
> 
> DATA TELECOM SERVICE
> 
>  
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>