[c-nsp] bridge over E1

[Rodney Dunn]

Please try and stay away from transparent bridging as the
performance is pretty horrible in comparison to other L2
tunneling protocols. If possible use some form of ATOM or
L2TPV3.

He mentioned between two routers so I took it there was
an ip transport between them so L2TPV3 should do the trick I
think.

Rodney

On Fri, Oct 20, 2006 at 08:57:10AM -0400, David Prall wrote:
> The below is off the top of my head.
> 
> Conf t
> Bridge irb
> Bridge group 1 ieee
> Bridge group 1 bridge ip
> Bridge group 1 route ip
> Int serial x/y
> Bridge-group 1
> No shut
> Int gig x/y
> Bridge-group 1
> No shut
> Int bvi 1
> Ip address x.x.x.x y.y.y.y
> No shut
> End
> 
> --
> David C Prall dcp at dcptech.com http://dcp.dcptech.com
>   
> 
> > -----Original Message-----
> > From: cisco-nsp-bounces at puck.nether.net 
> > [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Rivo 
> > ANDRIAMAMPIANINA
> > Sent: Friday, October 20, 2006 8:49 AM
> > To: cisco-nsp at puck.nether.net
> > Subject: [c-nsp] bridge over E1
> > 
> > Hi all,
> > 
> >  
> > 
> > We want to use controller E1 as bridge with another 
> > controller E1 (between 2
> > router)
> > 
> > Someone has any idea how to configure it.
> > 
> >  
> > 
> > Thank you
> > 
> >  
> > 
> > Rivo ANDRIAMAMPIANINA 
> > 
> > DATA TELECOM SERVICE
> > 
> >  
> > 
> > _______________________________________________
> > cisco-nsp mailing list  cisco-nsp at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-nsp
> > archive at http://puck.nether.net/pipermail/cisco-nsp/
> > 
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/