[c-nsp] 3GE-GBIC-SC problem

[Scott Spencer]

I am looking for some help getting some 3GE-GBIC-SC boards to work.
 
This is what we see: it downloads IOS, can not start it, then waits,
downloads it again, and so on and so on...

core2.dca2#sh diag 10

SLOT 10 (RP/LC 10): 3 Port Gigabit Ethernet

MAIN: type 68, 800-6376-01 rev F0

Deviation: 0

HW config: 0x00 SW key: 00-00-00

PCA: 73-4775-02 rev F0 ver 2

Design Release 2.0 S/N CAB0453GPA8

MBUS: Embedded Agent

Test hist: 0x00 RMA#: 00-00-00 RMA hist: 0x00

DIAG: Test count: 0x00000000 Test results: 0x00000000

FRU: Linecard/Module: 3GE-GBIC-SC=

L3 Engine: 2 - Backbone OC48 (2.5 Gbps)

MBUS Agent Software version 1.117 (RAM) (ROM version is 2.42)

ROM Monitor version 16.13

Fabric Downloader version used 10.1 (ROM version is 10.1)

Primary clock is CSC 1

Board is analyzed

Board State is Starting IOS (IOS STRT)

Insertion time: 4w4d (00:01:15 ago)

core2.dca2#sh diag 10

SLOT 10 (RP/LC 10): 3 Port Gigabit Ethernet

MAIN: type 68, 800-6376-01 rev F0

Deviation: 0

HW config: 0x00 SW key: 00-00-00

PCA: 73-4775-02 rev F0 ver 2

Design Release 2.0 S/N CAB0453GPA8

MBUS: Embedded Agent

Test hist: 0x00 RMA#: 00-00-00 RMA hist: 0x00

DIAG: Test count: 0x00000000 Test results: 0x00000000

FRU: Linecard/Module: 3GE-GBIC-SC=

L3 Engine: 2 - Backbone OC48 (2.5 Gbps)

MBUS Agent Software version 1.117 (RAM) (ROM version is 2.42)

ROM Monitor version 16.13

Fabric Downloader version used 10.1 (ROM version is 10.1)

Primary clock is CSC 1, Persistent LOS to slot 17 18 19 20

Board State is Waiting to retry download after persistent failures (RTRY
WAIT)

Insertion time: 4w4d (00:01:24 ago)

 

Any ideas?

 
Best regards,
Scott Spencer
Duane Whitlow & Co. Acct Mgr.
scott at dwc-computer.com
 <mailto:scott at dwc-computer.com> 
Toll free: 800.977.7473
Cell: 720.363.5244 (Denver metro)
IM: scottatDWC
 
Providing quality,high-end network hardware and the personal service you
deserve.
Cisco,Juniper,Extreme,Foundry,Sun,IBM,Dell