[c-nsp] BGP on 6506/Sup720-3B will not filter outbound

[Mark Tinka]

On Monday 23 October 2006 15:50, Jason Gintert wrote:

>  route-map BGP-Prefixes-Provider-UP permit 10
>   match ip address prefix-list Customer-A Customer-B Customer-C

I don't see a 'set' command for this one, so why don't you 
consolidate these with your other prefixes for outbound prefix-list 
filtering?

>
> When that didn't work I replaced the route-map with:
>
>  neighbor XX.XX.XX.209 distribute-list ALL-PREFIXES out
                         ^^^^^^^^^^^^^^^

Shouldn't that be 'prefix-list'? IIRC, 'distribute-list' would be an 
older method that used ACL's.

Mark.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 827 bytes
Desc: not available
Url : https://puck.nether.net/pipermail/cisco-nsp/attachments/20061023/761f501a/attachment.bin