[c-nsp] 3845 service-module session

Collins, Richard (SNL US) rich.collins at siemens.com
Sun Oct 29 10:12:25 EST 2006


I sent this on Friday but it didn't seem to get on the list. 

-----Original Message-----

Hi,

I am having a problem sessioning in the new Gigabit service module.  I
then noticed that perhaps the wrong image in running on this Gigabit
module.  Would that be the cause for an occasional reload of the card
and the the lack of reverse telnet access.  The session status works
though.

How does one go about copying a new image?  I didn't immediately find
the method on the Cisco web site though it looks like you need to first
session in to the card.

SSG#service-module gigabitEthernet 1/0 session

Trying 192.168.8.1, 2066 ...

% Connection timed out; remote host not responding



SSG#service-module gigabitEthernet 1/0 status
Service Module is Cisco GigabitEthernet1/0
Service Module supports session via TTY line 66
Service Module is in Steady state
Service Module reset on error is disabled
Getting status from the Service Module, please wait..
 
  EtherSwitch Service Module with 16 FE ports and 1 GE port
  System name      = Switch
  Model string     = NME-16ES-1G
  System board ID  = 0x4018
  Base MAC addr    = 0018.b97a.d480
  Switch number    = 1
  System uptime    = 0 days, 0 hours, 56 minutes, 15 seconds
 
  Software Details:
  Operating System = Cisco C3750 IOS Software
  Vesrion          = 12.2(25)SEC2
  Major version    = 1
  Minor Vesrion    = 12
  Image path       =
flash:/c3750-ipbase-mz.122-25.SEC2/c3750-ipbase-mz.122-25.SEC2.bin
 
SSG#
 

SSG#sho ver        
Cisco IOS Software, 3800 Software (C3845-ADVIPSERVICESK9-M), Version
12.4(8a), RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2006 by Cisco Systems, Inc.
Compiled Thu 20-Jul-06 01:10 by prod_rel_team
 
ROM: System Bootstrap, Version 12.3(11r)T2, RELEASE SOFTWARE (fc1)
 
SSG uptime is 2 weeks, 14 hours, 50 minutes
System returned to ROM by bus error at PC 0x62970324, address 0x20776178
at 05:04:32 PCTime Fri Oct 13 2006
System image file is "flash:c3845-advipservicesk9-mz.124-8a.bin"
-------------------------------------
line 66
 no activation-character
 transport preferred none
 transport input all
 transport output pad telnet rlogin lapb-ta mop udptn v120 ssh
-----------------------------------------------------------------
!
interface GigabitEthernet1/0
 description Network going out to ...............
 ip address 192.168.8.1 255.255.248.0
 ip access-group 101 in
 no ip redirects
 ip nat inside
 no ip virtual-reassembly
 ip route-cache flow
 ssg direction downlink
!


Thanks
Richard



More information about the cisco-nsp mailing list