[c-nsp] 1841 - multi-bri?

[Brett Looney]

Skeeve,

> Is it possible for the 1841 to have multiple ISDN/BRI cards?
> On the list of cards I could see E1/T1 which I assume is PRI, but I
> couldn't see BRI modules.

The cisco configuration tool is your friend:
http://tools.cisco.com/qtc/config/html/configureHomeGuest.html
It's a bit of a pain to drive and it's not always obvious where to find
stuff but is otherwise good.

Yes, the E1/T1 is a PRI card.

According to it, you can definitely put in 2xWIC-1B-S/T-V3 (single port ISDN
BRI)...

B.