[c-nsp] CatOS Oid for converted sup1a to ios

[Rudy Setiawan]

Ahh ok got it.
Thanks a lot for the help. :)

Regards,
Rudy Setiawan


-----Original Message-----
From: lee.e.rian at census.gov [mailto:lee.e.rian at census.gov] 
Sent: Tuesday, September 12, 2006 7:19 AM
To: Rudy Setiawan
Cc: cisco-nsp at puck.nether.net
Subject: Re: [c-nsp] CatOS Oid for converted sup1a to ios

"Rudy Setiawan" <rudy at rudal.com> wrote on 09/12/2006 12:03:11 AM:

> Heya all,
>
> Does anyone know about the CatOS OIDs for an IOS converted 6500 switch?
>
> Specifically for the cpu and memory usage for the sup engine (not the
MSFC).

cpu:    CISCO-PROCESS-MIB.my
memory: CISCO-ENHANCED-MEMPOOL-MIB.my

You need to cross reference the Entity MIB to figure out what the values
are for - eg:

ENTITY-MIB::entPhysicalDescr.5001 = STRING: CPU of Switching Processor
ENTITY-MIB::entPhysicalDescr.5017 = STRING: CPU of Routing Processor

CISCO-PROCESS-MIB::cpmCPUTotalPhysicalIndex.1 = INTEGER: 5017
CISCO-PROCESS-MIB::cpmCPUTotalPhysicalIndex.2 = INTEGER: 5001

CISCO-ENHANCED-MEMPOOL-MIB::cempMemPoolName.5001.1 = STRING: Processor
CISCO-ENHANCED-MEMPOOL-MIB::cempMemPoolName.5001.2 = STRING: I/O
CISCO-ENHANCED-MEMPOOL-MIB::cempMemPoolName.5017.1 = STRING: Processor
CISCO-ENHANCED-MEMPOOL-MIB::cempMemPoolName.5017.2 = STRING: I/O
CISCO-ENHANCED-MEMPOOL-MIB::cempMemPoolUsed.5001.1 = Gauge32: 158783016
bytes
CISCO-ENHANCED-MEMPOOL-MIB::cempMemPoolUsed.5001.2 = Gauge32: 11891760
bytes
CISCO-ENHANCED-MEMPOOL-MIB::cempMemPoolUsed.5017.1 = Gauge32: 76142712
bytes
CISCO-ENHANCED-MEMPOOL-MIB::cempMemPoolUsed.5017.2 = Gauge32: 11891816
bytes

Regards,
Lee


> So when you do an "attach 1" command under the CLI IOS and do a "show
proc
> cpu"
>
> I cant seem to find it anywhere or is it even accessible?
>
> Thank you.
>
> Regards,
> Rudy Setiawan
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/