[c-nsp] Vlans + PIX 515

[Amol Sapkal]

HI,

On 9/20/06, Shakeel Ahmad <shakeelahmad at gmail.com> wrote:
> prepare this interface as a trunk and there you go - you can have multiple
> virtual interfaces (related to VLAN) on your PIX - number of interfaces
> depends on your liscence.
>

If I am not wrong, you need not specify the PIX interface as a trunk
(there is no such command, AFAIK). What is needed is to convert the
uplink port to the switch as a trunking port.

Eusebio,

The config is as simple as:

interface ethernet2 vlan100 physical
interface ethernet2 vlan200 logical
!
nameif vlan100 XYZ securityXX
nameif vlan200 ABC securityYY
!

HTH,
Amol


>
>
>
>
> On 9/20/06, Eusebio López <eusebio at palmanet.net> wrote:
> >
> > hi,
> >
> >
> >
> > I have PIX 515 and in one of the interfaces I am remaining without IP´s
> > directions.
> >
> >
> >
> > Could I form a different address in same interface creating 2 vlans in
> > pix?
> >
> >
> >
> > Cheers.
> >
> > _______________________________________________
> > cisco-nsp mailing list  cisco-nsp at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-nsp
> > archive at http://puck.nether.net/pipermail/cisco-nsp/
> >
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>


-- 
Warm regards,

Amol Sapkal

-------------------------------------------------------------------
"When I'm not in my right mind, my left mind
gets pretty crowded"
-------------------------------------------------------------------